How to power flush a central heating system

 

The problem

Radiators rust internally producing black iron oxide 'sludge'. This sludge moves around the heating system blocking pipes, valves and boilers (pumps/heat exchangers/diverter valves).

The solution - Powerflush and corrosion inhibitor

Power flush equipment, normally set up outside, connects to your central heating and cleans the whole system without having to take off all the radiators.

Powerflush cleaner is added to the system water and starts to loosen the rust. The heating is turned on and radiator surfaces checked for cold spots. By flushing water through individual radiators and vibrating cold spots the sludge is rapidly loosened. The sludge flows from radiators and is collected at our magnet filter.

All radiators and pipe work are power flushed until water samples are clean and pH neutral.

A corrosion inhibitor is added to the clean water, radiators are balanced as required and finally we issue you a Powerflush certificate.

Our professional and friendly engineers will thoroughly powerflush your central heating system guaranteeing you:

For an Instant FREE Powerflush Quote

Call 0800 731 7939

1 | 2 | 3   Page 2 of 3

 

Recommended by Ariston Certificated by Worcester Bosch Group